Serving the Jacksonville area  ·  (904) 816-3633  ·  Open Mon-Sat 7am-6pm
📞 (904) 816-3633 Free Quote

Spray Foam Insulation in Atlantic Beach, FL (32266) · Local Professionals

Jacksonville Spray Foam Insulation · Fast response in Atlantic Beach and the Jacksonville area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+17Verified Reviews
15Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Atlantic Beach sits 15 miles east on the coast, where older beach cottages and newer construction face constant salt air and storm-driven humidity off the Atlantic. Your home's insulation and air sealing have to work harder here, and they often don't.

Jacksonville Spray Foam Insulation has been serving Atlantic Beach (32266) and the surrounding Jacksonville area since 2011. We know the building stock here: the mix of pier-and-beam foundations under vintage homes, the attics that pull in damp ocean air all summer, and the rim joists and crawl spaces where condensation builds up and insulation fails. When your cooling bills climb or a room never reaches temperature, we find out why and fix it with spray foam and air sealing that actually holds up to this climate.

Spray Foam Insulation in Atlantic Beach (32266)

Atlantic Beach's housing runs the full range: older beach cottages with crawl spaces under the floor, mid-century homes with attics that trap heat all summer, and newer construction with rooms over garages and ductwork run through vented attics. This is IECC climate zone 2A, hot and humid. Vapor drive runs from outside in for most of the year, which means your attic and crawl space are pulling in damp air from June through November and beyond. Vented attics and unsealed rim joists are the weak points, and they show up as condensation on insulation, musty smells, and cooling bills that never come down.

We spray open cell and closed cell foam into attics, walls, crawl spaces, and rim and band joists. Closed cell foam stops vapor and carries higher R-value per inch, which matters when you are working in a tight attic or under a low crawl space. Open cell foam is lighter, lower cost, and works well in wall cavities and attics where vapor control is not the primary goal. We also pull out contaminated or failed insulation before we spray anything new, and we seal air leaks around ductwork, electrical penetrations, and rim joists that open your conditioned space to the outside.

Since 2011, we have worked through every season and every condition in Greater Jacksonville. We know what the local building code requires at your address, and we help you navigate permitting and inspection so the work is done right and passes the first time.

Our services in Atlantic Beach

How a Job Works in Atlantic Beach

We start with a free on-site assessment. You walk us through the problem: a room that will not cool, a damp attic, a garage that is too hot, or a crawl space where you can see moisture on the rim joist. We look at the building, the existing insulation, and the air leaks that are costing you money. We measure the space, talk through open cell versus closed cell, and explain what R-value and thickness you need to get the job done. You get a written estimate with R-value and thickness specs so you know exactly what you are paying for.

On the job, we set up mechanical ventilation in the space and during the spray. Spray foam cures as it goes down, and we control the thickness per pass and the equipment ratio so you get the R-value specified. If we find wet insulation or a moisture source that has to be fixed first, we tell you straight: we fix the moisture first or we walk away. Once the foam is down and cured, we clean up and do a final walkthrough with you. The space is off limits for 24 to 48 hours while the foam finishes curing, then it is yours to use again.

Attic spray foam in Atlantic Beach typically runs from $1.50 per square foot for open cell to $1.20 per board foot for closed cell, depending on the R-value you need and what has to come out first. Wall and injection foam starts around $2 per square foot. Crawl space foam runs from $2,500 and up, because you are sealing the entire thermal boundary and often removing old insulation first. Rim joist and band joist sealing starts at $650. If you have failed insulation that has to come out, removal runs from $950 and up depending on area and condition. The exact cost depends on how much space you are covering, whether the existing insulation stays or gets pulled, and whether you choose open cell or closed cell. We do not settle on a price until we have seen the job. Call us at (904) 816-3633 for a free estimate, or fill out a contact form and we will reach out within one business day.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Atlantic Beach and nearby areas.

I have an older cottage in Atlantic Beach with a crawl space under the floor. The air feels damp down there, and I can smell mustiness in the living room above. What does spray foam fix?
Damp crawl spaces are the rule in Atlantic Beach, not the exception. Salt air and humidity from the Atlantic pull into vented crawl spaces, and that moisture wicks up into the rim joist, the band joist, and the floor above. Spray foam seals the rim joist and band joist, stops air infiltration, and cuts the moisture load. We also seal the band joist where rim joists meet the rim board, and we seal around any rim vents. If the crawl space itself has standing water or active seepage, that has to be fixed first before we spray anything. Once the moisture is under control, spray foam holds it back and your floors stay warmer and drier.
My attic has condensation on the insulation, especially in summer. Is that normal in Atlantic Beach, and what do we do about it?
Condensation in an attic in summer means humid outside air is getting in, and the insulation is cold enough that the moisture is condensing on it. In Atlantic Beach, vented attics pull in ocean air all summer long, and that air is loaded with moisture. Wet insulation loses R-value and can support mold growth. Before we spray foam, we have to stop the air leaks that are letting humid air in. We seal the rim joist, the band joist, the top plate of the walls, and any ductwork or electrical penetrations that open to the outside. Then we spray closed cell foam on the underside of the roof deck or on the attic floor, depending on whether you want to condition the attic or keep it vented. Closed cell foam stops vapor and stops air, so the moisture problem ends.
What does spray foam cost for an attic in Atlantic Beach, and what factors change the price?
Attic foam starts around $1.50 per square foot for open cell and $1.20 per board foot for closed cell, but the final price depends on the R-value you need, the thickness of the foam, and what has to come out first. If your attic has old fiberglass or cellulose insulation, we pull it out before we spray, and removal adds $950 and up. If you choose closed cell, you get higher R-value per inch and vapor control, which costs more per board foot but covers more area. A typical Atlantic Beach attic might run anywhere from $2,500 to $8,000 depending on square footage and what you are starting with. Call (904) 816-3633 for a free estimate so we can give you a real number.
Who inspects spray foam insulation work in Atlantic Beach, and what code rules apply at my address?
The City of Atlantic Beach building department sets and enforces the energy and building code at your address, and the building official inspects the work. Attic ventilation, ignition barriers, and thermal barriers are all code-governed, and the rules can differ between Atlantic Beach and Jacksonville or other nearby towns. The fifteen-minute thermal barrier is the detail most general contractors get wrong, and it matters for code compliance. We help you navigate what applies at your address and coordinate with the building department so the work passes inspection the first time. Check the City of Atlantic Beach website for permit requirements and fees, or call the building department and ask what applies to spray foam insulation at your property.
Can I stay in my house while you spray foam in the attic or crawl space? What about the smell?
Yes, you can stay in the house. We set up mechanical ventilation in the space during the spray and for 24 to 48 hours while the foam cures. The smell is strongest during the spray and the first 24 hours, and it fades as the foam cures. We give you a clear re-entry window so you know when the space is safe to use again. If you have young children, elderly family members, or anyone with respiratory sensitivity, let us know when you call (904) 816-3633 so we can plan the timing and ventilation around your needs.
Are you insured for spray foam work in Atlantic Beach?
Yes. We are fully insured with general liability and workers' compensation. When you call for an estimate, we can provide proof of insurance. Never hire a spray foam contractor without verifying their insurance coverage in writing, and always check that the policy is current. Insurance protects you if someone is injured on the job or if property is damaged during the work.
Summer cooling bills in Atlantic Beach are brutal. When is the best time to do spray foam insulation, and will it really help my AC bills?
The best time to spray foam is late fall or early spring, when the weather is mild and the attic is not baking or pulling in humidity. Summer is harder on equipment and on the cure time, and you are also dealing with peak cooling demand when you might want the work done fastest. That said, we work year-round. If your cooling bills are out of control right now, a free assessment will tell you what is actually costing you money. It might be air leaks in the rim joist or around ductwork, or it might be an attic with no insulation or failed insulation. Spray foam and air sealing typically reduce cooling costs by 15 to 40 percent depending on what you start with, but that is not a guarantee. We give you a realistic picture based on what we find.
Why choose us?

Trusted professionals since 2011

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Jacksonville

All your work handled by qualified professionals in Jacksonville

Attic Spray Foam Insulation

Unvented attic foam for Jacksonville's long cooling season

Included in your service

  • Roof deck spray foam for Jacksonville's vented attics
  • Creates unvented attic for Arlington block home heat loads
  • Keeps ductwork cooler through Southside's long summers
  • Built for IECC climate zone 2A humidity
Learn more→

Closed Cell Spray Foam Insulation

Closed cell protection for Duval County rim joists and walls

Included in your service

  • 2 lb closed cell foam for Jacksonville rim joists
  • Air barrier built for hurricane season humidity
  • Rated for Duval County's hot, humid climate zone 2A
  • Holds up in Southside slab and crawl space homes
Learn more→

Open Cell Spray Foam Insulation

Open cell comfort for Riverside and Arlington attics

Included in your service

  • Open cell fill for Riverside bungalow wall cavities
  • Softens heat load in Arlington block home attics
  • Sized for Jacksonville's climate zone 2A humidity
  • Fills rafters in Avondale and Springfield cottages
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for Jacksonville's historic bungalows

Included in your service

  • Injection foam for Riverside and Avondale wall cavities
  • No plaster teardown in these early-1900s Jacksonville homes
  • Closes gaps in Jacksonville's century-old wall framing
  • Fits Springfield cottage and bungalow wall framing
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for older Riverside and Avondale homes

Included in your service

  • Foam for crawl spaces under Riverside bungalows
  • Blocks damp air pulled in across Duval County
  • Covers band joist areas in older Avondale homes
  • Built for Jacksonville's humid climate zone 2A
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Jacksonville's humid floor systems

Included in your service

  • Seals rim joists in Mandarin slab-on-grade homes
  • Closes band joist gaps across Duval County
  • Cuts humid air intrusion through hurricane season
  • Fits Southside and Clay County foundation types
Learn more→

Garage Spray Foam Insulation

Garage foam for Mandarin and Southside bonus rooms

Included in your service

  • Foam for garages under Mandarin bonus rooms
  • Cuts heat transfer in Southside subdivision homes
  • Built for rooms over garages near vented attics
  • Sized for Jacksonville's long cooling season
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam across Duval County's hot summers

Included in your service

  • Closed cell foam for Duval County metal buildings
  • Fits barndominiums across Clay and Nassau counties
  • Stops condensation through Jacksonville humidity
  • Holds through hurricane season storms June to November
Learn more→

Commercial & New Construction Spray Foam

New construction foam planning for Duval and St. Johns builders

Included in your service

  • Foam planning for Duval and St. Johns new builds
  • Fits metal shells before drywall across Jacksonville
  • Sized to the energy code that applies at your address
  • Covers attics and walls in Clay County commercial jobs
Learn more→

Insulation Removal

Insulation removal for Jacksonville attics and crawl spaces

Included in your service

  • Clears old batts from Riverside crawl spaces
  • Removes blown insulation from Arlington block attics
  • Handles moisture-damaged material across Duval County
  • Prepares Avondale bungalows for new foam install
Learn more→

Insulation Replacement & Re-Insulation

Re-insulation for Jacksonville homes from slabs to crawl spaces

Included in your service

  • Re-insulates Springfield cottages and Southside slabs
  • Matches foam to Jacksonville's climate zone 2A
  • Fits crawl space and slab foundations across Duval County
  • Replaces old material in Mandarin subdivision attics
Learn more→

Air Sealing

Air sealing for Jacksonville's humid, storm-prone climate

Included in your service

  • Seals top plates in Arlington block home attics
  • Closes rim joist gaps across Jacksonville homes
  • Cuts stack effect driven by humid climate zone 2A
  • Reduces damp air intrusion through hurricane season
Learn more→
Verified client reviews

17+ Verified Client Reviews in Jacksonville

⭐⭐⭐⭐⭐ 4.9/5 · 17 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Jacksonville · Response within 24h · No commitment · ☎ (904) 816-3633

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Jacksonville ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm