Serving the Jacksonville area  ·  (904) 816-3633  ·  Open Mon-Sat 7am-6pm
📞 (904) 816-3633 Free Quote

Spray Foam Insulation in Middleburg, FL (32068) · Local Professionals

Jacksonville Spray Foam Insulation · Fast response in Middleburg and the Jacksonville area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+17Verified Reviews
15Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Middleburg sits 24 miles southwest of Jacksonville in Clay County, where rural acreage and metal farm buildings mix with newer subdivision homes built on slabs. Most of the residential stock here is either older pier-and-beam or slab-on-grade construction, with attics as the primary thermal boundary and ductwork running through unconditioned space during the long, humid summers.

Homeowners in Middleburg (32068) call Jacksonville Spray Foam Insulation because cooling bills climb fast in this climate, rooms over garages stay hot or cold no matter what the thermostat says, and attics collect moisture and condensation every summer. We have been serving Middleburg and the surrounding Jacksonville area since 2011, and we know exactly what these homes need.

Spray Foam Insulation in Middleburg (32068)

Middleburg's mix of older rural properties and newer subdivisions creates two distinct insulation challenges. On the older acreage and farm properties, metal buildings and older frame homes often have minimal or no insulation in walls and attics, and metal roofs that radiate heat straight into living space. On the newer slab homes, ductwork runs through vented attics where it loses conditioned air to the heat and humidity outside, and bedrooms over garages become thermal dead zones because the garage below is uninsulated and unconditioned.

This is IECC climate zone 2A, hot and humid. Moisture drives inward from outside for most of the year, especially during hurricane season from June through November. Attics and crawl spaces under older homes pull in damp air, and condensation on cold surfaces becomes visible by mid-summer. Spray foam insulation stops that moisture infiltration at the source, seals the ductwork leaks that waste cooled air, and creates a thermal barrier that actually works in a subtropical climate.

Our team has been installing spray foam insulation in attics, crawl spaces, walls, metal buildings and garages across Jacksonville and Clay County for over a decade. We understand Middleburg's building stock, the humidity load that dominates cooling costs here, and the access constraints on older properties and tight attic spaces.

Our services in Middleburg

How a Job Works in Middleburg

We start with a free on-site assessment. One of our team members visits your property, measures the space that needs to be insulated, checks for moisture or contamination in existing insulation, and explains what has to happen before any foam goes in. If your attic or crawl space has damp insulation, we tell you straight: that insulation comes out first, or we do not spray. We provide a written estimate with R-value and thickness specifications so you know exactly what you are paying for and what the code requires at your address.

On the day of the work, we set up mechanical ventilation to manage the application process. Spray foam is applied in controlled passes to the thickness specified in your estimate, with proper drum temperature and manufacturer ratio. The smell is real during application and for the first 24 to 48 hours afterward, so we talk through ventilation and re-entry timing before we start. If you are living in the house, we help you plan around that window. On metal buildings and barndominiums, we coordinate with any roofing or structural work already scheduled.

When the foam cures, we clean up thoroughly. Your property is left clean, and we walk through the finished work with you so you see what was done and understand how to maintain it.

Attic spray foam insulation in Middleburg typically runs from $1.50 per square foot for open cell foam to $1.20 per board foot for closed cell, depending on the thickness and R-value your home needs. A typical attic top-up in a Middleburg subdivision home runs between $2,500 and $6,000. Wall and injection foam retrofit work starts at $2 per square foot. Crawl space encapsulation with spray foam starts at $2,500. Metal building and barndominium insulation runs from $1.75 per square foot. If existing insulation has to come out first, removal starts at $950 and is added to your total. The final price depends on the square footage to cover, the R-value and thickness specified in code for your address, whether you choose open cell or closed cell foam, and what has to be removed or repaired before we spray. Call us at (904) 816-3633 for a free written estimate with all the details spelled out.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Middleburg and nearby areas.

I have a newer subdivision home in Middleburg with a room over the garage that never reaches temperature. Is spray foam the answer?
Often, yes, but we have to look first. If your garage is uninsulated and the attic above it is vented, the room above loses conditioned air through the floor and ceiling. Closed cell spray foam on the underside of the roof deck and on the garage walls stops that heat transfer. But if your ductwork serving that room is undersized or leaking in the attic, foam alone will not fix it. We assess the whole picture and tell you what will actually work.
My attic in Middleburg gets visibly wet and moldy every summer. Can I just spray foam over it?
No. If your attic or crawl space has damp or moldy insulation, moisture is getting in from outside or from a leak inside. We remove the contaminated insulation first, identify where the moisture is coming from, and seal the air leaks that are pulling in humid air. Once the space is dry and the leaks are sealed, then we spray foam. We fix the moisture first or we walk away. Call (904) 816-3633 and describe what you are seeing, and we will tell you what has to happen before any foam goes in.
What does spray foam insulation actually cost for an attic in Middleburg?
Open cell foam starts at $0.55 per board foot, and closed cell starts at $1.20 per board foot. For a typical 1,200 square foot attic in a Middleburg home, you are looking at a range of $2,500 to $6,000 depending on the R-value required by code, the thickness, and whether existing insulation has to come out first. The only way to know your actual cost is to get a free estimate on your specific space. Call (904) 816-3633.
Who decides what R-value and thickness I need in my Middleburg attic, and how do I know the job is done right?
The City of Middleburg building code and the building official set the R-value and thickness required for your address. We provide a written estimate that spells out the R-value, thickness, and foam type before we start. The building official may require an inspection after the work is complete, depending on your permit. That inspection verifies the thickness and coverage. We are fully insured with general liability and workers' compensation, and our estimate is the document you use to verify the work meets code.
I live in my Middleburg home during the work. How long do I have to be out, and will the smell bother my neighbors?
You do not have to leave. Mechanical ventilation during application keeps the smell contained, and we set a re-entry window of 24 to 48 hours after the foam cures. During that window, keep windows open and run fans. The smell is strongest in the first 24 hours and fades as the foam cures. On a metal building or barndominium in a master-planned area, check your HOA rules for exterior work, but insulation inside the building is not usually restricted. We coordinate the timing so you know exactly when to open windows and when the space is ready to use again.
Are you fully insured for spray foam insulation work at my Middleburg property?
Yes. We are fully insured with general liability and workers' compensation coverage. When you call for an estimate, ask to verify our insurance, and we will provide the details. Any spray foam contractor you hire should be able to show you proof of coverage before the work starts.
Summer cooling bills are killing me in Middleburg. When is the best time to install spray foam insulation?
The best time is before the long cooling season really ramps up, so late winter through early spring is ideal. That said, if your attic is leaking conditioned air or pulling in humid air, every month you wait is money out of your pocket. Spray foam work can happen year-round in Florida, but scheduling it in the shoulder seasons (March through May, September through October) means less discomfort during the application and cure windows. If your cooling bills are high right now, call (904) 816-3633 for an estimate. We can often fit you in within a few weeks.
Why choose us?

Trusted professionals since 2011

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Jacksonville

All your work handled by qualified professionals in Jacksonville

Attic Spray Foam Insulation

Unvented attic foam for Jacksonville's long cooling season

Included in your service

  • Roof deck spray foam for Jacksonville's vented attics
  • Creates unvented attic for Arlington block home heat loads
  • Keeps ductwork cooler through Southside's long summers
  • Built for IECC climate zone 2A humidity
Learn more→

Closed Cell Spray Foam Insulation

Closed cell protection for Duval County rim joists and walls

Included in your service

  • 2 lb closed cell foam for Jacksonville rim joists
  • Air barrier built for hurricane season humidity
  • Rated for Duval County's hot, humid climate zone 2A
  • Holds up in Southside slab and crawl space homes
Learn more→

Open Cell Spray Foam Insulation

Open cell comfort for Riverside and Arlington attics

Included in your service

  • Open cell fill for Riverside bungalow wall cavities
  • Softens heat load in Arlington block home attics
  • Sized for Jacksonville's climate zone 2A humidity
  • Fills rafters in Avondale and Springfield cottages
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for Jacksonville's historic bungalows

Included in your service

  • Injection foam for Riverside and Avondale wall cavities
  • No plaster teardown in these early-1900s Jacksonville homes
  • Closes gaps in Jacksonville's century-old wall framing
  • Fits Springfield cottage and bungalow wall framing
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for older Riverside and Avondale homes

Included in your service

  • Foam for crawl spaces under Riverside bungalows
  • Blocks damp air pulled in across Duval County
  • Covers band joist areas in older Avondale homes
  • Built for Jacksonville's humid climate zone 2A
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Jacksonville's humid floor systems

Included in your service

  • Seals rim joists in Mandarin slab-on-grade homes
  • Closes band joist gaps across Duval County
  • Cuts humid air intrusion through hurricane season
  • Fits Southside and Clay County foundation types
Learn more→

Garage Spray Foam Insulation

Garage foam for Mandarin and Southside bonus rooms

Included in your service

  • Foam for garages under Mandarin bonus rooms
  • Cuts heat transfer in Southside subdivision homes
  • Built for rooms over garages near vented attics
  • Sized for Jacksonville's long cooling season
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam across Duval County's hot summers

Included in your service

  • Closed cell foam for Duval County metal buildings
  • Fits barndominiums across Clay and Nassau counties
  • Stops condensation through Jacksonville humidity
  • Holds through hurricane season storms June to November
Learn more→

Commercial & New Construction Spray Foam

New construction foam planning for Duval and St. Johns builders

Included in your service

  • Foam planning for Duval and St. Johns new builds
  • Fits metal shells before drywall across Jacksonville
  • Sized to the energy code that applies at your address
  • Covers attics and walls in Clay County commercial jobs
Learn more→

Insulation Removal

Insulation removal for Jacksonville attics and crawl spaces

Included in your service

  • Clears old batts from Riverside crawl spaces
  • Removes blown insulation from Arlington block attics
  • Handles moisture-damaged material across Duval County
  • Prepares Avondale bungalows for new foam install
Learn more→

Insulation Replacement & Re-Insulation

Re-insulation for Jacksonville homes from slabs to crawl spaces

Included in your service

  • Re-insulates Springfield cottages and Southside slabs
  • Matches foam to Jacksonville's climate zone 2A
  • Fits crawl space and slab foundations across Duval County
  • Replaces old material in Mandarin subdivision attics
Learn more→

Air Sealing

Air sealing for Jacksonville's humid, storm-prone climate

Included in your service

  • Seals top plates in Arlington block home attics
  • Closes rim joist gaps across Jacksonville homes
  • Cuts stack effect driven by humid climate zone 2A
  • Reduces damp air intrusion through hurricane season
Learn more→
Verified client reviews

17+ Verified Client Reviews in Jacksonville

⭐⭐⭐⭐⭐ 4.9/5 · 17 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Jacksonville · Response within 24h · No commitment · ☎ (904) 816-3633

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Jacksonville ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm