Serving the Jacksonville area  ·  (904) 816-3633  ·  Open Mon-Sat 7am-6pm
📞 (904) 816-3633 Free Quote

Spray Foam Insulation in Jacksonville, FL (32203) · Local Professionals

Jacksonville Spray Foam Insulation · Fast response in Jacksonville and the Jacksonville area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm
+17Verified Reviews
15Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Fully Insured✅ Written Estimates with R-Value & Thickness Specs

Jacksonville's core neighborhoods like Riverside, Avondale, San Marco and Springfield are built on crawl spaces under early-1900s bungalows with original wall cavities that were never designed for today's cooling loads, while Arlington's mid-century concrete block homes trap heat in vented attics all summer long. Whether you live in a historic cottage with damp air pulling up through the floor or a newer Southside home with a garage underneath and ductwork running through an unconditioned attic, spray foam insulation and air sealing are the tools that actually stop the leak and bring your comfort back.

Jacksonville Spray Foam Insulation has been serving homeowners and property managers across Jacksonville and the surrounding area since 2011. We know the housing stock here, the humidity load that runs year-round, and the specific spaces in your home where moisture and temperature loss happen. When your cooling bills climb or a room never reaches temperature, we show up with a written estimate that names the R-value and thickness we're going to spray, and we do the work right.

Spray Foam Insulation in Jacksonville (32203)

Jacksonville's insulation challenges are rooted in the mix of building eras and the hot, humid climate that drives moisture into your home for most of the year. Homes in Riverside and Avondale sit on crawl spaces where outside air and groundwater vapor seep in continuously, keeping insulation damp and letting conditioned air leak out. Mid-century concrete block homes in Arlington have attics that bake in the summer sun, and ductwork routed through those vented attics loses 20 to 30 percent of your cooled air before it ever reaches the living space. Newer slab-on-grade homes with rooms over garages or bonus spaces route ductwork through unconditioned attics too, creating the same temperature control problem. Original wall cavities in older homes were built when air conditioning was not standard, and many of those walls have never been insulated at all.

Spray foam insulation seals the air leaks that are costing you money and stops the moisture that is damaging your insulation and framing. Closed cell foam provides a vapor barrier and high R-value in tight spaces like crawl spaces and rim joists. Open cell foam is the right choice for attics and walls where you need to control cost and allow the assembly to dry. Our team has been installing both in Jacksonville homes and commercial buildings for over a decade. We write every estimate with the R-value and thickness specified so you know exactly what you are getting, and we do the work with mechanical ventilation during cure and a clear re-entry window so your family is safe.

Our services in Jacksonville

How a Job Works in Jacksonville

We start with a free on-site assessment at your home or property. Our team walks the attic, crawl space, walls or garage with you, identifies where air is leaking and where insulation has failed or never existed, and explains what needs to happen first. If insulation is wet, contaminated or blocking access, we tell you that has to come out before anything else. If the substrate is wet or there is standing water, we do not spray over it. We fix the moisture first or we walk away.

Once we agree on scope and pricing, we schedule the work around your schedule and your property. If you are living in the home, we set up mechanical ventilation during the spray and give you a re-entry window of 24 to 48 hours before that space is occupied again. We protect your floors, belongings and landscaping. If the job involves removal of old insulation, we haul it away. If you have an active HVAC or roofing job, we coordinate the timing so the trades do not interfere with each other.

When the foam has cured and the job is complete, we walk through with you, show you what we sprayed, confirm the coverage and thickness, and leave your property clean. You get a copy of the estimate with the work performed and the R-value and thickness delivered.

Pricing for spray foam insulation in Jacksonville depends on the area to cover, the R-value and thickness you need, whether you choose open cell or closed cell foam, and what has to be removed or repaired first. A typical attic top-up runs from $1.50 per square foot for open cell foam on a sound attic, or $2 to $2.50 per square foot if old insulation has to come out first. Wall and injection foam retrofit work runs $2 per square foot and up depending on access and cavity depth. Crawl space encapsulation with closed cell foam typically starts around $2,500 for a modest space and climbs with the square footage and the work required to seal rim joists and band joists. Rim joist sealing alone starts at $650. Insulation removal runs from $950 depending on the volume and accessibility. The best way to know what your job will cost is to call us at (904) 816-3633 for a free written estimate. We measure the space, confirm the R-value and thickness you need to meet your comfort and code requirements, and give you a firm price before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Jacksonville and nearby areas.

I live in a Riverside or Avondale bungalow on a crawl space and my cooling bills are high even though I have insulation in the attic. What's going on?
Crawl space insulation in Jacksonville homes often fails because outside air and moisture seep in continuously, keeping the insulation damp and reducing its R-value. Damp insulation also lets conditioned air leak up into the living space and escape. Closed cell spray foam seals the rim joist, band joist and foundation rim, and it stops both the air leak and the moisture. We assess the crawl space first to confirm there is no standing water or active moisture problem. If the space is dry and sound, we spray closed cell foam on the rim and band joists and across the rim band to create an air seal. This is one of the highest-return jobs in Jacksonville because the leak is so large and the fix is so effective.
My attic has condensation or damp insulation. Can you spray foam right over it?
No. We do not spray foam over wet, damp or contaminated insulation. Moisture trapped under foam will continue to damage framing and will not dry. We remove the damp insulation first, let the attic dry, confirm there is no active leak or moisture source, and then spray the foam. If there is a roof leak or ventilation problem causing the moisture, that has to be fixed first or the problem will come back. Call us at (904) 816-3633 and we will walk your attic and tell you straight what has to happen.
What does spray foam insulation cost for a typical attic or wall job in Jacksonville?
Attic foam typically runs from $1.50 per square foot for open cell foam on a sound attic with no removal needed, to $2 to $2.50 per square foot if old insulation has to come out first. Wall and injection foam retrofit work runs $2 per square foot and up. A 1,200 square foot attic with no removal might run $1,800 to $3,000 depending on R-value and foam type. The key variables are the area, the R-value and thickness specified, the foam type, and whether removal is needed. Call us for a free estimate and we will give you a firm price based on your actual space.
Who decides the R-value and thickness I need, and does the city inspect spray foam insulation work in Jacksonville?
The Florida Building Code and the local building official in Jacksonville set the minimum R-value and thickness required for your attic, crawl space or walls. The code also governs ignition barriers and thermal barriers, which vary depending on the foam type and the application. We follow the code that applies at your address and help you navigate what is required, but the building official interprets and enforces the code. Permits and contractor registration vary from city to city across Greater Jacksonville, so we always defer to the local building department for what applies to your property. Ask your building department what is required before you call us, or we can help you sort it out when we come out for the estimate.
Can we live in the house while you spray foam in the attic or walls?
Yes, but with precautions. During the spray and cure, we run mechanical ventilation to manage the odor and off-gassing. We ask you to stay out of the treated space for 24 to 48 hours after the spray is complete to allow the foam to cure fully. If you have an occupied bedroom under an attic being sprayed, we coordinate timing and ventilation so the smell does not drift into living areas. Close interior doors and windows as we direct. The smell fades quickly once the foam is cured and ventilation is complete. Call us at (904) 816-3633 to discuss your specific situation.
Are you fully insured for spray foam insulation work at my Jacksonville property?
Yes. We carry general liability and workers' compensation insurance. When you call for an estimate, we are happy to provide proof of insurance. Always verify any contractor's insurance before work begins, and ask to see the actual policy or a certificate of insurance naming your address as the location of work.
When is the best time to schedule spray foam insulation work in Jacksonville, and should I do it before hurricane season?
The best time to schedule insulation work in Jacksonville is during the cooler months from October through April, when the attic or crawl space is easier to work in and you are not running the air conditioning. However, if your cooling bills are high or a room is uncomfortable, the job is worth doing any time. Spray foam itself does not prevent hurricane damage, but proper air sealing and insulation reduce the moisture load in your attic and crawl space, which helps protect your framing and insulation during the humid months. If you have an active roof leak or moisture problem, fix that before hurricane season so water does not get trapped under the foam. Call us to assess your space and schedule the work around your comfort needs.
Why choose us?

Trusted professionals since 2011

🏅

Insured contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Fully Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sat 7am-6pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Spray Foam Insulation Services in Jacksonville

All your work handled by qualified professionals in Jacksonville

Attic Spray Foam Insulation

Unvented attic foam for Jacksonville's long cooling season

Included in your service

  • Roof deck spray foam for Jacksonville's vented attics
  • Creates unvented attic for Arlington block home heat loads
  • Keeps ductwork cooler through Southside's long summers
  • Built for IECC climate zone 2A humidity
Learn more→

Closed Cell Spray Foam Insulation

Closed cell protection for Duval County rim joists and walls

Included in your service

  • 2 lb closed cell foam for Jacksonville rim joists
  • Air barrier built for hurricane season humidity
  • Rated for Duval County's hot, humid climate zone 2A
  • Holds up in Southside slab and crawl space homes
Learn more→

Open Cell Spray Foam Insulation

Open cell comfort for Riverside and Arlington attics

Included in your service

  • Open cell fill for Riverside bungalow wall cavities
  • Softens heat load in Arlington block home attics
  • Sized for Jacksonville's climate zone 2A humidity
  • Fills rafters in Avondale and Springfield cottages
Learn more→

Wall & Injection Foam Insulation

Wall injection foam for Jacksonville's historic bungalows

Included in your service

  • Injection foam for Riverside and Avondale wall cavities
  • No plaster teardown in these early-1900s Jacksonville homes
  • Closes gaps in Jacksonville's century-old wall framing
  • Fits Springfield cottage and bungalow wall framing
Learn more→

Crawl Space Spray Foam Insulation

Crawl space foam for older Riverside and Avondale homes

Included in your service

  • Foam for crawl spaces under Riverside bungalows
  • Blocks damp air pulled in across Duval County
  • Covers band joist areas in older Avondale homes
  • Built for Jacksonville's humid climate zone 2A
Learn more→

Rim Joist & Band Joist Spray Foam

Rim joist sealing for Jacksonville's humid floor systems

Included in your service

  • Seals rim joists in Mandarin slab-on-grade homes
  • Closes band joist gaps across Duval County
  • Cuts humid air intrusion through hurricane season
  • Fits Southside and Clay County foundation types
Learn more→

Garage Spray Foam Insulation

Garage foam for Mandarin and Southside bonus rooms

Included in your service

  • Foam for garages under Mandarin bonus rooms
  • Cuts heat transfer in Southside subdivision homes
  • Built for rooms over garages near vented attics
  • Sized for Jacksonville's long cooling season
Learn more→

Metal Building & Barndominium Spray Foam

Metal building foam across Duval County's hot summers

Included in your service

  • Closed cell foam for Duval County metal buildings
  • Fits barndominiums across Clay and Nassau counties
  • Stops condensation through Jacksonville humidity
  • Holds through hurricane season storms June to November
Learn more→

Commercial & New Construction Spray Foam

New construction foam planning for Duval and St. Johns builders

Included in your service

  • Foam planning for Duval and St. Johns new builds
  • Fits metal shells before drywall across Jacksonville
  • Sized to the energy code that applies at your address
  • Covers attics and walls in Clay County commercial jobs
Learn more→

Insulation Removal

Insulation removal for Jacksonville attics and crawl spaces

Included in your service

  • Clears old batts from Riverside crawl spaces
  • Removes blown insulation from Arlington block attics
  • Handles moisture-damaged material across Duval County
  • Prepares Avondale bungalows for new foam install
Learn more→

Insulation Replacement & Re-Insulation

Re-insulation for Jacksonville homes from slabs to crawl spaces

Included in your service

  • Re-insulates Springfield cottages and Southside slabs
  • Matches foam to Jacksonville's climate zone 2A
  • Fits crawl space and slab foundations across Duval County
  • Replaces old material in Mandarin subdivision attics
Learn more→

Air Sealing

Air sealing for Jacksonville's humid, storm-prone climate

Included in your service

  • Seals top plates in Arlington block home attics
  • Closes rim joist gaps across Jacksonville homes
  • Cuts stack effect driven by humid climate zone 2A
  • Reduces damp air intrusion through hurricane season
Learn more→
Verified client reviews

17+ Verified Client Reviews in Jacksonville

⭐⭐⭐⭐⭐ 4.9/5 · 17 verified Google reviews

Free Quote

Get Your Free Quote

Spray Foam Insulation in Jacksonville · Response within 24h · No commitment · ☎ (904) 816-3633

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Fully Insured 📍 On-site visits included in Jacksonville ✅ No hidden fees 🕐 Available Mon-Sat 7am-6pm